Sustainer Fin Reinforcement

[Under Construction]Under construction.
Revised: 11/06/26.

 

I wanted a few layers of Carbon Fiber to go from tip-to-tip on the fins for reinforcement. I decided on 3 layers. They are different sizes to add a profile to the fins.

I first made a template from the mounted fins.  I then decided that each layer would be an 1/2 inch smaller.  I also noted the weave direction that I wanted for each carbon fiber layer.

I cut out the templates leaving a tab at the bottom to line up with the bottom edge of the body tube.

I lined up the template and traced the outline on the fins and body tube. I also draw a center line on the tube.

I traced the tip-to-tip template on to pieces of carbon fiber noting the direction of the CF weave.

I then "stabilized" the carbon fiber cloth to allow me to cut it and prevent the fabric from unraveling.  I used FUSIONFIX™ EP Epoxy Super Clear Spray Adhesive sold by Easy Composites Ltd (https://www.easycomposites.us/). They have a video on how to use the product to stabilize CF fabric.

I let the CF fabric dry and the next day I cut the fabric to size.  With the fabric stabilized I get crisp corners without fraying.

I then used a sharp punch to punch a hole for the rail button nut.

With the CF pieces cut to shape, I weighed them to get an idea of how much resin I will need.

I cut the perforated release film, peel ply, and breather for the layup

 

For the vacuum bag is used a 24" tubular polyethylene bagging film from Fibreglast.
I used a smaller tube to slip inside the body tube so I wouldn't need to make some sort of tub caps to prevent the bagging film from getting sucked into the body tube. This way I just squeeze the the fiberglass body tube.  Here's the bagging film I used for the inside: 100mm (4”) Self-releasing Tubular Bagging Film from Easy Composites.

Sealing one end of the tube

 

 

[Back]             [Home]


Copyright © 2026  Paul Hopkins. All rights reserved.
Revised: 11/06/26.